Shenzhen Special Economic Zone commodity barcode management approach

Shenzhen Municipal People's Government Order (No. 47)

 Shenzhen Special Economic Zone commodity barcode management approach (July 13, 1995 release, September 14, 1995 implementation)

 Chapter I General Provisions

 The first is to promote the Shenzhen Special Economic Zone (hereinafter referred to as SAR) of goods bar code, commodity production sales information communication and improve the competitiveness of commodities, and promote economic and trade development of the SAR market, in accordance with relevant state regulations, combined with the actual SAR, formulated.

 Article 2 use, manufactured goods bar code products units and individuals must comply with this approach.

 The third term of the barcode for commodity including EAN international circulation used (EAN code) and the US Commodity barcode (UPC code).

 Article Shenzhen technical supervision and administrative department is the competent department of bar codes (hereinafter referred to as barcodes authorities), be responsible for organizing, coordinating and managing the work area bar code, perform the following duties:

 (A) carry out the implementation of national standards for bar code and related technical documentation, to encourage the adoption of international standards;

 (B) receiving product barcode registration;

 (C) the daily management and quality supervision is responsible for product code barcode for commodity products;

 (Iv) organize technical exchanges and technical training barcode industry.

 Chapter II Register barcode, filing and use

 Article use barcode for commodity must be registered. No unit or individual forged or fraudulent use of another product code.

 Article 6 An enterprise may voluntarily apply for registration product barcode. Where an application for registration of the product barcode unit, the following provisions shall provide preliminary data reported to the competent authorities barcode:

 (A) product barcode application for registration;

 (B) show the unit code certificate and submit a photocopy of the business license;

 (C) the use of trademarked goods product code must also provide the trademark registration certificates. Barcode application to the competent authorities within seven days of qualified candidates should be reported to the national competent authorities to review the bar code.

 Article packaging or labels printable surface area of less than forty square centimeters can apply for shortened codes.

 Article 8 enterprises to obtain product barcode registration certificate before the official opening of the enterprises registered product code and the same time as Chinese goods bar code system (hereinafter referred to as members of the system). Barcode authorities should regularly publish product code registered members of the system.

 Article IX members of the system to its registered product code shall enjoy exclusive rights, and shall perform the following duties:

 (A) Except as provided in Article 14 of the outside, use only the enterprises registered product code on this production, management of goods;

 (Ii) the use of barcode for commodity shall be the relevant national standards or enterprise standards formulated in accordance with relevant national standards.

 Article X of goods bar code is valid for two years, should apply after the expiration of renewal. Barcode administrations before the expiry of three months' notice in writing to members of the system to apply for renewal. Members of the system fails to apply for renewal, the competent authorities cancel its barcode product bar code registration certificate and make an announcement. The term refers to renewal after the bar code system members in the commodity bar code used to request an extension of the time limit to use.

 Article XI members of the system to change its corporate name, business license within thirty days to the department in charge of the bar code renamed renamed the day on which the formalities. Administrations of Barcode renamed product code should be re-advertised.

 Article XII of members of the system to terminate the use of a product code, the door to the competent Ministry in writing to apply for cancellation of their goods bar code bar code. It has been canceled merchandise barcode, barcode authorities should make an announcement to stop using, and no unit or individual shall not enabled.

 Article 13 The cancellation of barcode for commodity businesses, such as the need to re-use the product bar code, in accordance with these provisions of Article VI re-registration application for product barcode registration.

 Article 14 An enterprise entrusted processed products and use the principal register a product code, shall take effect from the date of the processing contract within thirty days from the following materials to the department in charge of registration barcode: barcode for commodity certificate of registration (a) the principal;

 (B) processing contract.

 Article 15 An enterprise application, change the product bar code, the State shall be required to pay fees.

 Chapter III Supervision and Administration barcode for commodity products

 Article XVI production, operation or use of the product barcode for commodity commodity barcodes shall comply with the mandatory national standards, industry standards; no national standards and industry standards, should be in line with corporate standards.

 Article XVII Where the production of goods bar code printing products business, must have the ability to print, and to undertake before the competent authorities to apply bar code printing qualification certificates after commodity bar code printing business.

 Article XVIII barcode administrations to implement supervision and inspection of goods bar code products can be made to the production, marketing and use its barcode for commodity inspection unit registration certificate, registration certificate and printing qualification certificates. Barcode competent authorities may seize suspected counterfeit, fake bar code products and commodity certificates preceding paragraph, but make a decision within fifteen days from the date of seizure should be, and notify the detained person; major, complex cases needs to be extended by the competent the executive heads of department approval, may be extended fifteen days. Barcode administrations should be exercised first and second paragraph of the terms of reference of two or more administrative law enforcement personnel, and law enforcement personnel should be present certificates sampling units.

 Chapter IV Penalty

 Article XIX in violation of the provisions of Article 5.2, forgery or fraudulent use of a product code, bar code may be ordered by the competent authorities confiscated its illegal gains and impose a one to three times the amount of illegal business fine.

 Article XX violates the provisions of Article 5 or Article 14 stipulates that the use of an unregistered product barcode or handle product barcode filing, barcode responsible department shall order within a time limit; it refuses to apply, a fine of five thousand yuan fine.

 A violation of the provisions of Article IX provides that the registration of the enterprise product code assigned to others to use, the bar code may be ordered by the competent department of corrections, and impose a $ 5,000 fine. Article 22 in violation of the provisions of Article 12, paragraph 2, has been canceled without authorization enabled product code, bar code may be ordered by the competent department of corrections; refuse to correct, impose a fine of 5,000 yuan.

 Article 23 violates the provisions of Article XVII, did not apply for barcode printing qualification certificates to the competent authorities to undertake without bar code printing business, confiscate the illegal income, impose illegal business amount to a fine of treble.

 Article 24 The competent department barcode staff abuse, dereliction of duty by the competent authorities give administrative sanction to the person directly responsible; constitutes a crime, be held criminally responsible.

 Chapter V Supplementary Provisions

 Article 25 The effect from the date of publication.

 Shenzhen Special Economic Zone product barcode registration and use of Rule (January 1999 promulgated)

 Chapter I General Provisions

 Article 1 In order to guide enterprises to register and use the product bar code, according to the State Quality and Technical Supervision Decree No. 1 "barcode management approach" and the Shenzhen Municipal People's Government Decree 47, "Shenzhen Special Economic Zone commodity barcode management approach" to develop the present rules.

 Article 2 of the registration and use of barcode for commodity business, must comply with the rules.

 Third Shenzhen City is the city of the EAN bar code management mechanism, under the leadership of Shenzhen Quality and Technical Supervision, perform the following duties:

 (A) implement the principles, policies, regulations and standards of commodity bar codes;

 (B) organize, coordinate and manage the city's commodity bar codes;

 (C) the city is responsible for preliminary registration product code, change, renewal and cancellation;

 (Iv) the city is responsible for product barcode technology training, product barcode technology consulting and services;

 Register Chapter barcode

 Article by law to obtain a business license in the city producers, sellers may voluntarily apply for registration vendor identification code product barcode (EAN codes, UPC codes).

 Article 5 An enterprise may be a "single production enterprises, group enterprises, import and export enterprises," three types of application for registration of goods manufacturers barcode identification code. "Individual producers" means no single subordinate enterprises productive enterprises; "Group companies" refers to the company name contains "Group", "always" or business license clearly marked productive "branches" of the enterprise; "Importers enterprise "means a business name with" import and export "business license or clearly marked import and export business.

 Article 6 An enterprise usually only apply for the use of a product code standard version of EAN-13 code, you can meet in the global circulation areas; if its trading partners, particularly the requirements, may apply for the UPC code. When a quarter of the time bar code printing area than the area of the packaging or label printable area, you can apply for Standard Edition at the same time or after the application using the shortened version of the product bar code.

 Article VII The following procedures shall apply for business registration procedures:

 (A) With the business license and corporate (Unit) Code IC card to receive the "China Commodity barcode vendor identification code registration application", fill in accordance with the provisions in duplicate;

 (Ii) Provide a copy of the business license duplicate;

 (Iii) application shortened version of the enterprise shall be provided using the product barcode shortened version of the list of products and product packaging or design is issued in duplicate;

 (Iv) required to pay a one-time joining fee, annual maintenance costs of the system, the newspaper announcement fee; and to produce original remittance voucher, submit a copy of a duplicate.

 (E) appoint at least one of the known production technology management staff as "enterprise barcode Administrator" (hereinafter referred to as "bar management staff"); and submitted by the people in charge of issuing "bar management staff recommended list."

 Article VIII preliminary qualifiers, city barcode management agencies from the date of the preliminary examination, 7 days reported nationwide barcode management agencies for approval to the applicant issued the "receiving receipt"; those who fail the first instance, the city of barcode management agencies will application information returned to the applicant and explain the reasons.

 Article IX During the approval, enterprise management staff recommended bar barcode management agencies should participate in the application for registration of the month held induction training, and assessment made by the "Possession of membership card" to ensure the proper use of a product code.

 Article X registration period is generally 15 days, after 15 days of registered enterprises can query to the city barcode management agencies.

 Article XI who pass the examination and approval by the agency on behalf of the bar code management issued a "Chinese goods bar code system certificate" and a regular member of a registered trade announcement system manufacturers barcode identification code. Twelfth roads management staff to coordinate with the various departments within the enterprise, according to relevant regulations require the preparation of the enterprise "barcode encoding rules" enterprise standard, fill out the "bar code product information table", reported by the competent leader issuing barcode management agencies review of the record.

 Chapter III barcode use

 Article XIII use barcode for commodity must be registered, to prohibit any unit or individual forgery or fraudulent merchandise bar codes and bar code management bodies of others without registration approved the registration of the product bar code.

 Article 14 An enterprise obtaining "Chinese goods bar code system certificate", the Chinese goods bar code system that is to become a member (hereinafter referred to as members of the system) and Shenzhen, bar code technology and application of the member associations. Members of the system to its registered product code exclusive rights.

 Article XV A valid member of the system of "Chinese goods bar code system certificate" (hereinafter referred to as "system member certificate"), "Possession of membership card", "barcode encoding rules" for the use of a product code-related business; enjoy barcode management agencies the following services:

 (A) "Possession of members' technical training;

 (B) the product barcode using the technical and legal advice;

 (C) fill out the "bar code product information table", created for free, and subsequent product database to promote its goods and services;

 (D) fill out the "bar code printing inspection application form", free access to goods barcode quality inspection and quality coordination services;

 (V) product barcode infringement and violation complaints and coordinator.

 Article XVI of "single company" to apply for registration vendor identification code of the product bar code system members can only use the product code on the enterprise's products in the enterprise, the enterprise may not be registered without product code assigned to the enterprise commodity production of products other than used.

 Article XVII of "Group companies" apply for registration vendor identification code of the product bar code system members can only use the enterprise product code on the subordinate units of the production and operation of enterprises produced goods are not allowed to transfer to the enterprise and production business use of goods other than products of subordinate units. The so-called subordinate units of the business of the products are marked by the means of the distribution companies, producers, agents, and other joint and several liability on the packaging to bear the legal goods, the production of these commodities subordinate units for the record companies. Enterprise Systems Group members use barcode for commodity following procedures shall apply: (a) fill in using the enterprise product barcode subordinate units, "the record companies Registration Form";

 (B) "barcode encoding rules" corporate standards of the enterprise, in order to subordinate units assigned code segment or coding;

 (C) notify subordinate units send at least one well-known production technology management personnel as members of tubes, submitted by the person in charge of issuing subordinate units of "Possession of staff recommended list" and participate in the Possession of staff induction training, a "Possession membership card ";

 (Iv) under the parent corporate unit holders "barcode encoding rules" corporate standards, according to the "Shenzhen City to use someone else registered product barcode filing rules" requirement filing procedures;

 (5) Providing marked by the distribution companies, producers, agents, import and export of commodities such as packaging design comp or logo.

 Outside Article 18 "the import and export enterprises" to apply for registration vendor identification code of the product bar code system members can only use the enterprise registered product code on the enterprise production and management of goods, not allowed to transfer to the enterprise production and management the use of goods. The business of goods means the packaging of goods marked by the distribution companies, producers, agents, import and export of goods assume legally binding commitments, commissioned the production of these commodities business as "the record business." "Import and export enterprises," members of the system using the commodity bar following procedures shall apply:

 (A) To be completed by the present business goods, "the record companies Registration Form";

 (B) in the enterprise "barcode encoding rules" enterprise standard for record companies allocated code;

 (Iii) at least send a notice filing enterprise known as the production technology management staff member of tubes, the author responsible for issuing the "Article management staff recommended list" and participate in the Possession of staff induction training, a "Possession of membership card" ;

 (Iv) the record companies only use the barcode for commodity import and export enterprises in the import and export enterprises "barcode encoding rules" and "bar code product information table" with the code of goods, and shall hold the "barcode encoding rules" Enterprise standards and "bar code product information sheet" as the "Shenzhen City to use someone else registered product barcode filing rules" requirement filing procedures;

 (5) Providing marked by the distribution companies, producers, agents, import and export product packaging or design comp identity.

 Article XIX members of the system should be "barcode encoding rules" corporate standard requirements for the company's products are encoded. Once the product is endowed, the lifetime can not be changed. If you need to change, you should first overall co-ordination between the internal and distribution, retailers, Revision enterprise "barcode encoding rules" corporate standard, re-fill "the bar code product information sheet" reported to the municipal administration of barcode for the record. When members of the system to add new products, should promptly fill out the "bar code product information sheet" Added to these new product code, bar code and make a report after the city administration for the record.

 Diershitiao members of the system shall be as follows printed barcode:

 (A) commissioned by the barcode recognition unified management agencies barcode printing units, and check their "bar code printed accreditation certificate."

 (B) according to national standards of size, color, position designed product barcode;

 (C) commissioned the "bar code printed accreditation certificate" printing units on behalf of customizable original film; (d) according to national standards for acceptance of technical requirements for bar code printing products.

 Article XXI Municipality enterprises registered Chinese goods bar code (ie prefix 69 EAN codes, such as 690, 691, 692, etc.) is an international product code. Any unit or individual may refuse to use any pretext, may not have been qualified to use barcode for commodity goods store and then forced to use the code, the bar code can not be charged extra fees to the company. However, distribution, retail business product barcode the right to refuse the use of non-standard goods and bar code printing substandard goods, the enterprises should rectification within a time limit of three months.

 Article 22 When the consumer packaged goods suppliers can not meet the needs of retail sales, retailers need their own package of goods sold in this store can be used in-store code. Use store code must comply with the following provisions:

 (A) limit the use of in-store codes for the following commodities: 1. Retailers immediate packaging random weight (quantity) of goods; 2. supplier of consumer packaging, based on the retailer split or combination of repacking goods .

 (Ii) the use of in-store merchandise code only sold directly to consumers, but not wholesale to other retailers.

 (Iii) store code can not be used in the present store sales of packaged goods suppliers, but can not be assigned to the supplier free to use.

 (Iv) for commodity bar code printing in substandard goods sold, shall require suppliers rectification within a time limit of three months, during which the product can be used temporarily store code transition rectification, but the store code label marked only retailers the name can not appear the name of the supplier, when the supply of goods bar code printing qualification, retailers should immediately stop using the store code on these items.

 (E) For the currently unused product code in the sales of goods, retailers should require suppliers to barcode management agencies to apply for registration.

Chapter IV barcode Maintenance

 Article 23 "Chinese goods bar code system certificate" and "Chinese goods bar code system renewal certificate" valid for two years, should apply for renewal after the expiration.

 Article 24 The members of the system in the three months before the expiry date of such a certificate, to the city barcode management agencies receive renewal information.

 Article 25 to participate in the renewal of the members of the system should be within the above-mentioned certificate is valid according to the following procedures renewal procedures:

 (A) verify and fill in the relevant information: 1. carefully checked, "the original registered information"; 2. Fill out the "Chinese goods bar code vendor identification code registration renewal form", and there is a change in the information required to be marked column; 3. fill in the "bar code business administrator recommended list."

 (B) payment: In accordance with provisions of the State Price Bureau, Ministry of Finance (1991) No. 270 the text, to pay the cost of system maintenance costs.

 (Iii) provide the following information: 1. The present corporate (units) Original Code IC card. 2. "Chinese manufacturers goods bar code identification code reuse renewal registration form" a duplicate; 3. "original enterprise registration information" and "bar code administrator recommended list" each one; 4. produce original remittance voucher, a copy of a two parts; 5. business name of the company has changed, you should fill out the "Chinese goods bar code system information change registration form" (hereinafter referred to as "change of registration information table") in duplicate, according to Article 28 of the Rules change procedures .

 Article 26 The members of the system to terminate the use of the product bar code, you should fill out the "Chinese goods bar code system to stop using the manufacturer code registration form" notification bar code management body will cancel the barcode for commodity. Who fails to participate in the renewal, bar code management body will cancel the product bar code and system membership. It has been canceled commodity bar code, bar code management agency announcement to stop using, and no unit or individual shall not enabled.

 Article 27 was canceled barcode for commodity businesses, such as the need to re-use barcode for commodity shall Rule Chapter apply to re-apply product barcode registration.

 Article 28 member of the system changes its legal corporate name, legal person, address of the business license, the relevant authorities shall, within 30 days, and relevant documents "system member certificate", fill in the "registration information changes table "for the change to apply. When members of the system to change contacts and other related matters, it shall, within fifteen days from the date of change, holding "system member certificate", fill out the "change of registration information table" for the change to apply. Members of the system change the corporate name should be consistent with one of the following:

 (A) members of the system to change the name, business license registration number unchanged;

 (B) due to changes caused by system administrative division member names change, but the name of the same theme, and the government can provide the relevant documents;

 (C) provide proof of industry and commerce departments, are indeed members of the system name changes;

 (Iv) joint venture, merging to form the new company name is consistent with the original members of the system name;

 (V) in the process of restructuring state-owned enterprises, the new enterprise system is the original member of the original members of the system or as the main holding and can provide proof. Complete change procedures, report approval of the national working organ of barcode, the members of the system to issue a new "Chinese goods bar code system certificate."

 Article 29 The members of the joint system, merged to form the company, state-owned enterprises, etc. In addition to Article 28 (a) to (v) provisions, shall re-apply for registration formalities.

 Article 30 "Chinese goods bar code system certificate" is missing, the system replacement member shall submit an application report, after investigation and verification, unified newspaper confirm replacement.

 Chapter IV Supplementary

 Article 31 of the Rules of the date of promulgation.

 Shenzhen Special Economic Zone to use someone else registered product barcode filing rules (January 1999 promulgated)

 Chapter I General Provisions

 The first is to guide the city for the legitimate use of another registered product bar code, "Shenzhen Special Economic Zone commodity barcode management approach" to develop in accordance with Rule 47 of the Shenzhen Municipal People's Government Decree.

 Article 2 processing products for others or by others engaged in the use of another person's registered product code business, must comply with the rules.

 Third Shenzhen City is the city of the EAN bar code filing of institutions under the leadership of the Shenzhen Municipal Technical Supervision, perform the following duties:

 (A) implement the principles, policies, regulations and standards of commodity bar codes;

 (B) the organization, coordination, management and use of another person's registered enterprise product barcode filing work;

 (C) accept the use of another person's registered enterprise product barcode filing application to review, change, renewal and cancellation;

 (Iv) for filing the company offers a product barcode technology training, advice and services;

 Article IV of the Rules called "by others operating the product" means the product packaging label distributed by others, agents, import and export, producer and other legally binding commitments undertaken by others while others use a registered product code products, the production of these products business for the record companies. Using the "Group companies" registered product code can only record companies is the group division of the company or branch; use the "Import and Export Enterprise" registered product barcode and the record companies must entrust enterprises corresponding business contracts.

 Chapter II Record program

 Article enterprise business license and corporate (Unit) Code IC card to receive the "use of another product barcode filing application" in accordance with regulations to fill.

 Article VI of the record companies should provide the following materials:

 (A) "use of another product barcode filing application" in duplicate originals;

 (B) the record companies a copy of business license duplicate;

 Documents (iii) the record companies as "Group companies" of subordinate enterprises, or operate copy of the contract with the "import and export enterprises" and foreign enterprises signed in duplicate;

 (D) "group companies" or "import and export enterprises", "Chinese goods bar code system certificate" or other EAN, UCC registration approval document a copy of the member units in duplicate;

 (E) by the "Group companies" or "import and export enterprises," prepared by the "barcode encoding rules" corporate standard or list of product codes and the "bar code product information table" in duplicate;

 (F) printed with "enterprise group" or "Import and Export Enterprise" business (agents, distributors, producers, import and export) tagging and registration barcode product packaging or design as finalized in duplicate.

 Article send one skilled in the enterprise production and management companies act as administrators barcode, barcode participate in working bodies of the month record held induction training, and assessment made by the "Possession of membership card" to ensure the proper use of a product code.

 Article VIII comply with Rule VI and Article VII of the record of qualified enterprises, municipal barcode filing work agencies issued a "Shenzhen goods bar code registration certificate" and be regular bulletins.

 Chapter III filing barcode use

 Article IX record companies to obtain "Shenzhen goods bar code registration certificate" only after the official opening of the record companies product code, and at the same time as the Shenzhen Municipal application of bar code technology and member associations (hereinafter referred to as members of the record companies).

 Member Article X of the record companies can only use another person's registered product code on Rule VI paragraph V "bar code product information sheet" of goods.

 Article XI member record companies with an effective "Shenzhen goods bar code registration certificate" for the use of the record companies of the business product barcode, enjoy the following services:

 (A) Possession of staff and technical training;

 (B) the product barcode using the technical and legal advice;

 (C) fill out the "bar code product information table", created for free, and subsequent product database to promote its goods and services;

 (Iv) members of the system fill in the "bar code printing inspection application form", get free merchandise barcode quality inspection and quality coordination services;

 (V) product barcode infringement and violation complaints and coordinator.

 Twelfth members shall be as follows for the record companies printed barcode:

 (A) work commissioned by the agency in a unified bar code printing bar code recognition unit, and check its "bar code printed accreditation certificate."

 (B) the national standards designed product barcode;

 (C) commissioned the "bar code printed accreditation certificate" printing units on behalf of customizable original film;

 (IV) according to national standards for acceptance of technical requirements for bar code printing products.

 Article XIII "Shenzhen goods bar code registration certificate" is valid and should be entrusted to the company's "Chinese goods bar code system certificate" or other EAN, UCC member units registered documents of approval of the same validity, upon expiration fill out the "continued use of another product barcode filing show table "in accordance with the Rules Article renewal after passing the examination can be used.

 Article 14 Record companies do not renew overdue for three months who qualify automatically log off the record.

 Chapter IV Supplementary

Article XV of the rules from the date of promulgation.

Shenzhen Special Economic Zone bar code printed accreditation rules (January 1999 promulgated)

 Chapter I General Provisions

 The first is to ensure the quality bar code printing products, according to the State Quality and Technical Supervision Decree No. 1 "barcode management approach" and the Shenzhen Municipal People's Government Decree 47, "Shenzhen Special Economic Zone commodity barcode management approach", with reference to the series of quality assurance standards the relevant regulations of the rules.

 Article Implementing Regulations of accreditation bar code printing job management, application, review assessment, and certification renewal review.

 Article Where the production of bar code printing products, printing companies must have the ability, in accordance with the Implementing Regulations, the application only after receiving the certificate accreditation bar code printing bar code printing business.

 Article Shenzhen is a city of the EAN bar code printed accreditation body of work under the leadership of the Shenzhen Municipal Technical Supervision, perform the following duties:

 (A) implement the principles, policies, regulations and standards of commodity bar codes;

 (2) To organize, coordinate, manage accreditation bar code printing work;

 (3) Accepting accreditation bar code printing application, the filing of documents and technical information for the review;

 (Iv) the development plan review by the review and renewal;

 (V) entrusted to the Shenzhen Municipal Association of bar code technology and application site assessment;

 (Vi) entrusted to the Shenzhen Municipal Quality Supervision, Inspection stations barcode fitness test;

 (Vii) issued by the "bar code printed accreditation report", issued a "bar code printed accreditation certificate";

 (H) is responsible accreditation bar code printing technology training, product barcode technology consulting and services.

 Chapter II accreditation program

 Article Application: Applicants enterprise business license and corporate (Unit) Code IC card to receive the "Shenzhen accreditation bar code printing application form" (hereinafter referred to as "Application Form") and related materials. (A) according to the provisions required to fill out "Application Form" in duplicate;

 (B) fill out a questionnaire for a duplicate;

 (C) provide a copy of business license duplicate;

 (Iv) complete dossier were sent to "bar code printed accreditation program of work record card" business card by recording operation and complete all the procedures.

 Article Training and Evaluation: Applicants should send the company's technology business leader, corporate Possession of staff, technical personnel design, plate-making technicians, printing technology, and laboratory technicians to participate in bar code printing technology training, after passing the examination certificates .

 Article developing enterprise technology management standards: Businesses should develop the enterprise "bar code printing quality assurance manual" enterprise standards in accordance with relevant national standards, and in-house implementation. Article VIII of the establishment of quality monitoring and recording:

 (A) comply with the accuracy of the national standard GB / T 14258-93 requirements of ± 0.01mm detection means;

 (B) according to national standard GB / T 14258-93 specific requirements of batch test bar code printing products, and to establish the test print inspection records, product testing records and barcode printing inspection certificate system.

 Article IX fitness test and the test strip width adjustment: The technical evaluation for recognition of printed business conditions through adaptive trials.

 (A) direct the appropriate test methods, the use of "adaptive ruler" as "bar code printing suitability test" standard provisions under the guidance of Shenzhen Barcode Quality Supervision, Inspection Station;

 (B) The ruler is placed under normal production conditions printed at the corners of the complex sheet plate, random sampling after printing 25, fill out the "single sample" submission;

 (C) Shenzhen barcode quality inspection stations to complete the testing and data processing adaptive test, test report and having suitable test parameters.

 Article X site assessment: hiring technical experts with management experience 2-3-member assessment team, according to the following procedures for enterprises and content-the-spot assessment:

 (A) digestion enterprise reporting documents and technical information;

 (B) review meeting held on-site, the main agenda is: 1. bar code preach site accreditation review purposes, procedures, methods, requirements; 2. apply to the competent leader introduces the basic situation of the enterprise.

 (C) the examination of the application in the field of corporate departments and workshops;

 (Iv) check the company "bar code printing quality assurance manual" implementation, according to the expert review group "assessment form" content and documentary requirements;

 (V) assessment team and competent leadership applicant's assessment verification and exchange of views;

 (Vi) assessment team of experts are given the assessment results.

 Article XI assessment rules: according to "assessment form" content and assessment requirements itemized.

 (A) rating: The person referred to as A, are referred to as basic by B, not by those referred to as C. Also note the circumstances and problems and suggestions for improvement.